Low

ARD00370 - 

Evaluation Board, MCP6L2 & PIC18F66J93 Energy Meter Reference Design

MICROCHIP ARD00370

Bildet er bare ment som illustrasjon. Se produktbeskrivelsen.

Produsentens varenummer:
ARD00370
Varenummer:
2313808

Produktoversikt

ARD00370 is a MCP6L2 and PIC18F66J93 energy meter reference design. Its a fully functional single phase meter that uses the 12bit successive approximation analogue to digital (SAR ADC) integrated in the microcontroller. This low cost design has a shunt as the current sensor. The signal from the shunt is amplified by two external operational amplifiers and applied to the input of the ADC. The PIC18F66J93 directly drives the LCD and communicates via UART with the MCP2200, offering an isolated USB connection for meter calibration and access to the device power calculations. The system calculates active and reactive energy; active, reactive and apparent power; power factor; RMS current; RMS voltage, and line frequency.
  • Energy meter software allows calibration and system monitoring
  • Isolated USB connection
  • ICSP programming header
  • 9V DC input
  • 9 digit LCD display with icons for KWh and KVARh
  • Pulse output for active and reactive energy
  • USB connection
  • Opto isolators for pulse outputs

Applikasjoner

Power Management, Metering, Portable Devices

Innhold

MCP6L2 and PIC18F66J93 energy meter, Mini USB cable.

Produktinformasjon

:
Microchip
:
MCP6L2, PIC18F66J93
:
Amplifier
:
Operational Amplifier
:
Energy Meter Reference Board MCP6L2, PIC18F66J93, Information Sheet
:
-
Finn lignende produkter Velg og endre egenskapene ovenfor for å finne lignende produkter.

Tilknyttede produkter

Føres ikke lenger

No longer stocked:: true No Longer Manufactured::

Kundeevalueringer

Community resultater.

Vil du se informasjon om dette produktet fra andre kunder?

 Les diskusjoner, blogger og dokumenter fra medlemmene av vårt community.

Filtre:

Legg ut et spørsmål, eller start en diskusjon på vårt community.