HDC1000EVM - 

Evaluation Module, Sensor, Temperature & Humidity, Complete HR & Temperature Data Logger


Bildet er bare ment som illustrasjon. Se produktbeskrivelsen.

Produsentens varenummer:
Teknisk datablad:
Se alle tekniske dokumenter


Eval Board HDC1000
MSP430F5528, HDC1000
Texas Instruments
Temperature Sensor & Humidity Sensor
Finn lignende produkter Velg og endre egenskapene ovenfor for å finne lignende produkter.


HDC1000EVM is an evaluation module for evaluating the performance of HDC1000 low power, high accuracy digital humidity and temperature sensor. The EVM is a breakable PCB which consists of 3 sections. The first section is a USB to I2C converter based on MSP430F5528 microcontroller, the second section is a conversion board (WCSP to SIL 100mil pitch) with the HDC1000 and the third section is a narrow 5mm x 5.5mm PCB with the HDC1000 (WCSP to SIL 50mil pitch) which allows to reduce the thermal mass of the system (Sensor + PCB). Both second and third section can be used for remote measurements. The HDC1000EVM does not need additional hardware, calibration nor does it require any software programming. Only the HDC1000EVM GUI has to be installed. The software is able to configure the HDC1000 registers, display temperature and relative humidity in two graphs and data can be exported in CSV format.
  • Plug & Play
  • Complete Relative Humidity (RH) and Temperature data logger
  • Size scalable according to evaluation needs
  • Relative Humidity (RH) operating range 0% to 100%
  • 14bit measurement resolution
  • Relative Humidity accuracy ±3%
  • I2C interface


Sensing & Instrumentation, Consumer Electronics, Medical, Portable Devices

Tilknyttede produkter