SN65LVDS389DBT

The SN65LVDS389DBT is an octal differential Line Driver implements the electrical characteristics of low-voltage differential signaling (LVDS). This signaling technique lowers the output voltage levels of 5V differential standard levels (such as EIA/TIA-422B) to reduce the power, increase the switching speeds and allow operation with a 3.3V supply rail. Any of the 16 current-mode drivers will deliver a minimum differential output voltage magnitude of 247mV into a 100Ω load when enabled. When disabled, the driver outputs are high-impedance. Each driver input (A) and enable (EN) have an internal pull-down that will drive the input to a low level when open-circuited.

• Very low radiation (EMI)
• Low-voltage differential signaling with typical output voltage of 350mV and a 100Ω load
• Driver is high-impedance when disabled or with VCC <lt/>1.5V
• Bus-pin ESD protection exceeds 15kV
• 630Mbps Signalling rate
• <lt/>2.9ns Propagation delay time
• <lt/>150ps Output skew
• <lt/>1.5ns Part-to-part skew
• 35mW at 200MHz Total power dissipation in each driver
• Green product and no Sb/Br

Applikasjoner

Wireless, Communications & Networking, Computers & Computer Peripherals