CMV12000-2E5M1PA QA

CMV12000-2E5M1PA QA is a high speed CMOS image sensor with 4096 by 3072 pixels developed for machine vision and other applications. The image array consists of 5.5μm x 5.5μm pipelined global shutter pixels, which allow exposure during read-out. The image sensor has 64 8-, 10 - or 12bit digital LVDS outputs (serial). The image sensor also integrates a programmable gain amplifier and offset regulation. Each channel runs at 600Mbit/s which results in a 132fps frame rate at full resolution and 12bit. When 10bit per pixel is used, the frame rate increases to 300fps. Higher frame rates can be achieved in row-windowing mode or row-subsampling mode. These modes are all programmable using the SPI interface. A programmable on-board sequencer generates all internal exposure and read-out timings. It is used in applications such as machine vision, high-end inspection, video/broadcast, motion capture, and intelligent transportation systems (ITS).

• Mono chroma
• A resolution of 4096×3072 at 300 frames per second, designed for high performance applications
• 8T global shutter pixel with true correlated double sampling (true CDS), capture fast moving objects
• Standard dynamic range of 60dB high dynamic range (HDR) modes possible
• LVDS input clock frequency is 600KHz maximum
• Select high frame rate or improved image quality
• Receiver input current is 20µA maximum at (VINP (INN=1.2V±50mV,0 ≤ VINP0 INN ≤ 2.4V)
• Output short circuit current is 12mA maximum at (VOUTP = VOUTN)
• On-chip timing generation, 60dB dynamic range
• Operating junction temperature range from -30°C to 70°C, 237-µPGA package