AD633JRZ-RL

AD633 is a functionally complete, four-quadrant, analogue multiplier. It includes high impedance, differential X and Y inputs, and a high impedance summing input (Z). The low impedance output voltage is a nominal 10V full scale provided by a buried zener. It is laser calibrated to a guaranteed total accuracy of 2% of full scale. Nonlinearity for the Y input is typically less than 0.1% and noise referred to the output is typically less than 100µV rms in a 10Hz to 10KHz bandwidth. A 1MHz bandwidth, 20V/µs slew rate, and the ability to drive capacitive loads make the device useful in a wide variety of applications where simplicity and cost are key concerns. It is used in applications such as multiplication, division, squaring, modulation/demodulation, phase detection, voltage-controlled amplifiers/attenuators/filters.

• Laser-trimmed accuracy and stability, operating voltage range from 8V to 18V
• Differential high impedance X and Y inputs
• High impedance unity-gain summing input
• Laser-trimmed 10V scaling reference
• Small signal bandwidth is 1MHz typical at (VO = 0.1V rms, TA = 25°C)
• Slew rate is 20V/µs typical at (VO = 20V p-p, TA = 25°C)
• Settling time to 1% is 2µs typical at (ΔVO = 20V, TA = 25°C)
• Wideband noise is 1mV rms typical at (f = 10Hz to 5MHz, TA = 25°C)
• Operating temperature is 0°C to 70°C, package style is 8-lead SOIC_N

Merknader

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party