AD7665ASTZRL

AD7665 is a 16bit, 570kSPS, charge redistribution SAR, analogue-to-digital converter that operates from a single 5V power supply. It contains a high speed 16bit sampling ADC, a resistor input scaler that allows various input ranges, an internal conversion clock, error correction circuits, and both serial and parallel system interface ports. It is hardware factory-calibrated and is comprehensively tested to ensure such ac parameters as signal-to-noise ratio (SNR) and total harmonic distortion (THD), in addition to the more traditional dc parameters of gain, offset, and linearity. It features a very high sampling rate mode (Warp), a fast mode (Normal) for asynchronous conversion rate applications, and for low power applications, a reduced power mode (Impulse) where the power is scaled with the throughput. It is used in applications such as data acquisition, communication, instrumentation, spectrum analysis, medical instruments, process control.

• Integral linearity error is +2.5LSB maximum at (-40°C to +85°C, AVDD = DVDD = 5V)
• Transition noise is 0.7LSB typical at (-40°C to +85°C, AVDD = DVDD = 5V)
• Signal-to-noise ratio is 90dB typical at (fIN = 10KHz, -40°C to +85°C, AVDD = DVDD = 5V)
• Total harmonic distortion is -100dB typical at (fIN = 180KHz, -40°C to +85°C, AVDD = DVDD = 5V)
• 3.6MHz typical -3dB input bandwidth at (-40°C to +85°C, AVDD = DVDD = 5V)
• SPI®/QSPI™/MICROWIRE™/DSP compatible, single 5V supply operation
• Power dissipation is 64mW typical at (-40°C to +85°C, AVDD = DVDD = 5V)
• Aperture jitter is 5ps rms typical at (-40°C to +85°C, AVDD = DVDD = 5V)
• Operating temperature is -40°C to +85°C
• Package style is 48-lead LQFP

Merknader

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party