LTC6907IS6#TRPBF

LTC®6907 is a micropower, 40KHz to 4MHz resistor set oscillator that is versatile, compact and easy to use. Micropower operation benefits portable and battery-powered equipment. At 400KHz, the LTC6907 consumes 36µA on a 3V supply. A single resistor programs the oscillator frequency over a 10:1 range with better than 0.65% initial accuracy. The output frequency can be divided by 1, 3 or 10 to span a 100:1 total frequency range, 40KHz to 4MHz. Application includes low cost precision programmable oscillator, rugged, compact micropower replacement for crystal and ceramic oscillators, high shock and vibration environments, portable and battery-powered equipment, PDAs and cellular phones.

• 40µA typ power supply current (RSET = 500k, Pin 3 = 0V, RL = 10M, DIV = 1, fOUT = 400KHz, V+ = 3.6V)
• Typical frequency accuracy is a ±0.25% (V+ = 3V to 3.6V, 400KHz ≤ f ≤ 4MHz)
• Frequency range from 40KHz to 4MHz
• One resistor sets the oscillator frequency
• Start-up time under is 200µs (at 4MHz)
• First cycle after power-up is accurate
• 150 ohm CMOS output driver
• Operating supply range from 3 to 3.6V (TA = 25°C)
• 50% typical duty cycle (TA = 25°C, V+ = 3V to 3.6V)
• 6 lead plastic TSOT-23 package, operating temperature range from -40°C to 85°C

Merknader

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party