SC18IM704PWJ

SC18IM704PWJ is an UART to I²C-bus bridge. It is designed to serve as an interface between the standard UART port of a microcontroller or microprocessor and the serial I²C-bus; this allows the microcontroller or microprocessor to communicate directly with other I²C-bus devices. It can operate as an I²C-bus controller. It controls all the I²C-bus specific sequences, protocol, arbitration and timing. The host communicates with SC18IM704 with ASCII messages protocol; this makes the control sequences from the host to SC18IM704 become very simple. Application includes enable I²C-bus controller support in a system, I²C-bus instrumentation and control, industrial control, medical equipment, cellular telephones, handheld computers.

• UART host interface, I²C-bus controller, eight programmable I/O pins
• High-speed UART: baud rate up to 460.8kbit/s, fast-mode I²C-bus: 375KHz
• 256-byte TX FIFO, 256-byte RX FIFO, programmable baud rate generator
• Sleep mode (power-down), UART message format resembles I²C-bus transaction format
• I²C-bus controller functions, multi-controller capability
• 5V tolerance on the input pins, 8 N 1 UART format (8 data bits, no parity bit, 1 stop bit)
• ESD protection exceeds 2000 V HBM per JESD22-A114
• Latch-up testing is done to JEDEC Standard JESD78 that exceeds 100mA
• Supply voltage range from 1.71 to 3.6V (VDD = 1.71V to 3.6V, Tamb = -40°C to +105°C)
• TSSOP16 package, ambient temperature range from -40 to +105°C