AD9834BRUZ-REEL7

AD9834 is a low power DDS device capable of producing high performance sine and triangular outputs. It also has an on-board comparator that allows a square wave to be produced for clock generation. Consuming only 20mW of power at 3V makes the device an ideal candidate for power-sensitive applications. This device is written to using a 3-wire serial interface. This serial interface operates at clock rates upto 40MHz and is compatible with DSP and microcontroller standards. This device has a power-down pin (SLEEP) that allows external control of the power-down mode. Sections of the device that are not being used can be powered down to minimize the current consumption. It is used in application such as frequency stimulus/waveform generation, frequency phase tuning and modulation, low power RF/communications systems, liquid and gas flow measurement, sensory applications: proximity, motion, and defect detection, test and medical equipment.

• Power supply range is 2.3V to 5.5V
• Output frequency upto 37.5MHz
• Sine output/triangular output
• On-board comparator
• 3-wire SPI® interface
• 20mW power consumption at 3V
• Resolution is 10bits, integral nonlinearity is ±1LSB
• Signal-to-noise ratio is 60dB typ
• Operating temperature is -40°C to +105°C, MCLK is 50MHz max
• Packaging style is 20-lead thin shrink small outline package [TSSOP]

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party