STOTG04EQTR

STOTG04EQTR is a USB on-the-go full-speed transceiver in a 24 pin QFN package. It provides complete physical layer (PHY) solution for any USB-OTG device. It contains VBUS charge pump and comparators, ID line detector and interrupt generator, and the USB differential driver and receivers. The STOTG04 transceiver is suitable for mobile and battery powered devices because of its low power consumption and power-down operating mode. The transceiver is capable of operation in several different modes. It can operate in basic USB-OTG mode, as an I2C and UART transceiver, or in audio mode. Behaviour of the transceiver is fully configurable through the two-wire I2C serial bus. The transceiver supports session request protocol and host negotiation protocol. The applications are mobile phones, PDAs, MP3 players, printers and digital cameras.

• Meets USB specification Rev. 2.0 and on-the go supplement to the USB 2.0 specification
• Analog car kit-compatible
• Four operating modes: USB, I2C, UART and Audio
• Configurable using I2C serial interface
• Capable of 12Mbit/s full-speed and 1.5Mbit/s low-speed modes of operation
• Standard digital interface compliant with the OTG transceiver specification
• Supports the session request protocol (SRP) and host negotiation protocol (HNP)
• 35mA typical VBUS charge pump output current for 3.3V supply voltage
• Ability to control external charge pump for higher VBUS currents
• Integrated pull-up/-down resistors and ±6kV ESD Protection on all USB pins (contact discharge)

Warnings

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.